Section V. CARRIER ENGINE WIRING HARNESS CABLES
3-14. Removal
3-15. Installation
a. Tag and disconnect all
a. Install wiring harness.
electrical
leads,
b. Secure clamps, leads and connectors to the
connectors and clamps.
b. Remove wiring harness.
harness.
Section VI. CARRIER ENGINE FUEL PUMP ASSEMBLY
3-16. General
3-17. Removal and Disassembly
a. Removal. Remove fuel pump assembly as
The fuel pump incorporates the governor assembly and
is flange-mounted to the rear of the air compressor and
illustrated in figure 3-10.
b. Disassembly.
is gear driven from the engine gear train. The fuel pump
Refer to figure 3-10 and
draws fuel from the supply tank and delivers it at correct
disassemble the fuel pump assembly.
pressure and amount to the injectors for each cylinder.
3-18
