(b) From opposite end remove spring
(b) Remove forward and reverse
selector valve snap ring (25). Tap lightly on opposite end
stop retainer ring (39), spring stop (38), valve spring (36)
of forward and reverse selector valve. Valve and valve
and forward and reverse valve (v). Remove neutral
oil seal (24) will come out together. Remove shut-off
valve guide plug (40), piston (42), neutral valve (43)
valve plug (4) and O-ring. Remove shut-off valve (5) and
valve spring (45), and stop pin (44). From opposite end
shut-off valve spring (32).
remove snap ring (47) and spring stop (46).
CAUTION
CAUTION
When removing roll pins, it is
It is recommended when removing
recommended a press be used to
the roll pins (13, 14) from the
depress valve stop (2), valve (28, 29),
pressure regulating (50, 51) and
and spool springs (3, 42).
(c) Depress regulating valve spring stop
regulating valve (63, 64) a press be
(2) and spring (3). Remove roll pin (15). Release press
used, to depress valve stop and
slowly. Springs will push spring stop (2) from control
spring.
housing (38). Remove spring stop and inner and outer
spring (39, 3). Remove roll pin on opposite end.
(c) Depress pressure regulating valve
Remove result ing valve stop (27) and valve (28, 31)
(58) and spring (6, 57). Using. a m remove roll pin (18).
from control housing. Depress safety valve spring sop,
Release press slowly springs will push spring stop (58)
valve spring and safety ball valve (41).
from housing. Remove inner and outer spring (56, 57).
(2) Disassembly of transmission control
Remove roll pin on opposite end. Remove valve stop
valve assembly.
(49), valve (51), and valve sleeve (50). Depress safety
(a) Remove shift cylinder and end plug
valve stop (61) and spring (62). Remove roll pin (14).
housing retaining plug (1, fig. 5-9). Remove shift
Remove stop
(61), spacer (63), spring (62), and
cylinder (4), end plug (19), and selector valve spring (24).
regulating valve ball (64). Remove screws (63) and
Remove selector valve (20). Compress lightly forward
washers (52) from oil circuit plate (66). Use caution so
and reverse piston guide (29) ad remove retainer ring
as not to scratch or mar control housing surface or oil
(27). Remove piston guide and piston (31).
circuit plate.
5-20
