TM 5-3810-288-12
STEP 1.
REFER TO PARAGRAPH-2-5 AND UNREEVE THE CABLES FROM FRONT AND
REAR DRUMS. REFER TO FIGURE 2-26 AND REMOVE COTTER PIN, PIN
AND REVERSING CHAIN.
STEP 2.
REMOVE CAPSCREWS (5, FIGURE 2-27) AND LOCKWASHERS (4). REMOVE
LAGGING BOLTS (FIGURE 2-26).
STEP 3.
REMOVE ROPE LAGGING FROM THE FRONT DRUM, AND REMOVE REVER-
SING SPROCKET HALVES (3) FROM THE LAGGING HALVES BY REMOVING
CAPSCREWS (1) AND LOCKWASHERS (2).
STEP 4.
INSTALL REVERSING SPROCKET HALVES (3) ON CROWD SPROCKET
LAGGING HALVES (6)AND INSTALL THE CROWD SPROCKET LAGGING
ON THE FRONT DRUM. INSTALL CAPSCREWS (5) AND LOCKWASHERS (4).
1. Capscrew
3. Sprocket halves 5.
Capscrew
ME 3810-288-12/2-27
2. Lockwasher
4. Lockwasher
Figure 2-27. Installing crowd sprocket lagging.
2-21
