TM 5-3810-289-12
(c) Governor.
(a) Engine.
Make ---------------------------------- Cummins
Type----------------------------------- Mechanical variable speed
Crankcase --------------------------- 16 quarts
Oil filter ------------------------------- 4 quarts
(d) Fuel injector.
Fuel tank ----------------------------- 50 gallons
Fuel filter ----------------------------- 3 quarts
Make ---------------------------------- Cummins
Coolant system -------------------- 7 gallons
Model --------------------------------- PT
(b) Crane-shovel.
(e) Fuel pump.
Transmission gear case --------- 3 quarts
Machinery gear case ------------- 8 gallons
Make ---------------------------------- Cummins
Propel gear case ------------------ 2 quarts
Model --------------------------------- G
(f) Fuel filter.
(6) Adjustment data. Refer to the appropriate chapter
and paragraph for the adjustment of specific components.
Make ---------------------------------- Fram
(7) Settings.
Model --------------------------------- FRM-1826
Thermostat full open -------------- 195'
(g) Batteries.
(8) Nut and bolt torque data. Refer to appropriate
Make ---------------------------------- MIL-STD-MS 35000-3
paragraph for nut and bolt torque data.
Type----------------------------------- 6 TH (dry charge)
Volts----------------------------------- 12
(9) Maximum allowable lifting loads. Refer to figure
Qty------------------------------------- 4 ea
1-3 for crane boom angles.
(5) Capacities.
Table 1-1. Operating Ranges
Boom length
Radius
Boom angle
Boom point
Crane
In feet
in feet
in degrees
pin height
service
30
12
73
33' 6"
25,000
15
67
32' 6"
19,000
20
57
29' 9"
12,9000
25
44
25' 6"
9,600
30
28
18' 6"
7,600
40
12
78
43' 9"
24,800
15
73
42' 9"
18,800
20
66
41' 0"
12,700
25
57
38' 3"
9,400
30
48
34' 6"
7,350
35
38
29' 3"
6,000
40
24
21' 0"
5,000
50
15
77
53' 3"
18,600
20
71
51' 9"
12,400
25
65
49' 9"
9,200
30
58
47' 0"
7,150
35
51
43' 6"
5,750
40
43
38' 9"
4,750
50
21
23' 0"
3,400
60
20
74
62' 3"
12,200
25
69
60' 6"
8,950
30
64
58' 6"
6,900
35
58
5 5' 9"
5,550
40
53
52' 3"
4,500
50
39
42' 6"
3,150
60
20
24' 9"
2,300
Note. The preceding ratings apply only to machines that are level and standing on hard level uniform supporting surfaces. Loads must be freely
suspended. The radii specified are loaded radii. Ratings include blocks, hooks, slings, or other equipment used in handling loads. Proper care must
be exercised by the operator at all times to avoid shock or side loadings on the boom. Loads do not exceed 75% of tipping loads with the machine in
the least stable position. Loads shown in table 1-1 are for general crane service with the machine on firm, level ground. Maximum boom angle is 78%.
1-5
