TM 5-3810-289-12
CHAPTER 3
OPERATOR'S MAINTENANCE INSTRUCTIONS
Section I. BASIC ISSUE ITEMS
3-1.
Tools and Equipment
3-2.
Maintenance and Operating Supplies
Tools, equipment, and repair parts issued with or
Maintenance and operating supplies required for
authorized for the model 22BM crane-shove are listed in
initial operation are listed in section III of appendix C.
the basic issue items list, appendix C.
Section II. LUBRICATION INSTRUCTIONS
prevent accumulation of foreign matter.
3-3.
General
c. Points of Lubrication. Service the lubrication
This section contains lubrication instructions which
points at proper intervals as illustrated on the lubrication
are supplemental to, and not specifically covered, in the
order.
lubrication order. For the current lubrication order, -refer
to DA PAM 310-4 (Military Publications).
d. OES Oil.
3-4.
Detailed Lubrication Information
(1) Crankcase oil level must be checked
frequently, as oil consumption may increase.
a. General. Keep all lubricants in closed containers
and store in a clean, dry place, away from external heat.
(2) Oil may require changing more frequently
Allow no dust, dirt, or other foreign material to mix with
than usual because contamination by dilution and sludge
the lubricants. Keep all lubrication equipment clean and
formation will increase under cold weather operation
ready for use.
conditions.
b. Cleaning. Keep all external parts not requiring
e. Oil Filter Service. Refer to figure 3-1 and service
lubrication clean of lubricants. Before lubricating the
the oil filter.
equipment, wipe all lubrication points free of dirt and
grease. Clean all lubrication points after lubricating to
3-1
