STEP 1.
REFER TO PARAGRAPH 2-4 AND UNREEVE THE CABLES FROM FRONT AND REAR DRUMS. REFER
TO FIGURE 2-23 AND REMOVE COTTER PIN, PIN AND REVERSING CHAIN.
STEP 2.
REMOVE CAPSCREWS (5) AND LOCKWASHERS (4). REFER TO FIGURE 2-23 AND REMOVE LAGGING
BOLTS.
STEP 3.
REMOVE ROPE LAGGING FROM THE FRONT DRUM, AND REMOVE REVERSING SPROCKET HALVES
(3) FROM THE LAGGING HALVES BY REMOVING CAPSCREWS (1) AND LOCKWASHERS (2).
STEP 4.
INSTALL REVERSING SPROCKET HALVES (3) ON CROWD SPROCKET LAGGING HALVES AND
INSTALL THE CROWD SPROCKET LAGGING ON THE FRONT DRUM. INSTALL CAPSCREWS (5) AND
LOCKWASHERS (4).
ME 3810-294-10/2-24
Figure 2-24. Installing crowd sprocket lagging.
2-19
