TM 5-3810-294-34
KEY to fig. 16-2.
16-3. Disassembly
1. Spacer
15.
Screw' (2)
a. Steering Column Disassembly. Refer to
2. Spring seat
16.
Washer (2)
figure 1 6-2 and disassemble the steering column as
3. Bearing
17.
Clamp
follows:
4. Nut (2)
18.
Bolt
5. Washer (2)
19.
Coupling
6. Bolt (2)
20.
Rubber shield
7. Housing
21.
Pin
8. Switch lever
22.
Washer
9. Ring
23.
Dust cap
10. Screw (2)
24.
Spring
11. Switch assembly
25.
Spring seat
12. Tube
26.
Bearing
13. Insert (21
27.
Jacket
14. Springwasher (2)
(1) Remove spacer (1) and spring seat (2) from tube
(12), and remove tube (12) from jacket (27).
(2) Loosen bolt (18) and remove clamp (17). Slide
rubber shield (20) upward.
(3) Remove screws (15), washers 116), and remove
coupling (19) from tube (12). Remove inserts (13),
washer springs (14), and rubber shield (20).
(4) Remove washer (22), dust cap (23), spring (24),
and spring seat (25) from tube (12). Press pin (21 ) from
tube (12) only if replacement of the pin is necessary.
(5) Remove switch lever (8).
(6) Remove screws (10) and switch assembly (11)
from housing (7).
(7) Remove nuts (4), washers (5), and bolts (6) from
housing (7). Remove housing (7) and ring (9) from jacket
(27).
(8) Press bearings (3 and 26) from housing (7) and
jacket (27) only if replacement is necessary.
b. Disassembly of Steering Gear Assembly.
Refer to figure 16-3 and disassemble the steering gear as
follows:
Key to fig. 16-3
1. Seal
26.
Screw (4)
51.
Seal assembly
1. Retaining ring
27.
Washer (41
52.
Washer
3. Washer
28.
Adapter
53.
Seal
4. Seal
29.
Seal
54.
Seal adapter
5. Bearing
30.
Washer
55.
Screw (4)
6. Screw (4)
31.
Seal
56.
Boot
7. Nut
32.
Retaining ring
57.
Washer
8. Upper cover
33.
Worm shaft
58.
Nut
9. Adjusting screw
34.
Ball nut
59.
Washer (6)
10. 0-ring
35.
Backup washer
60.
Screw 1(61
11. Nut
36.
Worm seal
61.
Nut
12. Washer
37.
Cup
62.
Plug
13. Key washer
38.
Washer
63.
Side cover
14. Thrust bearing
39.
Washer
64.
Bearing
15. Spacer
40.
Retaining ring
65.
Washer
16. Roller bearing
41.
Piston ring
66.
Washer
17. Thrust washer
42.
Setscrew
67.
O-ring
18. Seal
43.
Seat
68.
Adjusting screw
19. Valve
44.
Valve
69.
Nut
20. Seal (2)
45.
Rack piston
70.
Seal assembly
21. Seal
46.
Seal
71.
Retaining ring
22. Thrust washer
47. Seal
72.
Retainer
23. Roller bearing
48. Housing
73.
Adjusting screw
24. Spacer
49. Roller bearing
74.
Sector shaft
25. Thrust washer
50. Retaining ring
Figure 16-2. Steering assembly
16-3
