TM 5-3810-294-34
(3) Remove nuts (61, fig. 17-3) and lock
(e) Remove lock wire 127), nuts (26), and
washers (62).
capscrews (54).
(4} Remove drive unit from axle housing.
(f)Pull up on one half of case assembly (28)
(5) Remove and disassemble axle differential
and strike gear (60) with a soft mallet to separate
as follows:
case assembly (28).
(g)Disassemble thrust washers (55 and 57i,
(a) Center punch one carrier housing (76)
leg and bearing cap (20) to insure proper
side gears (56), pinions 158), and spider (59).
reassembly.
(h)Remove bearings (25) from case halves
(b) Break lock wire (27) and remove
with a suitable puller.
(6)Remove capscrews (15), lockwasllers (14),
capscrews (22), lockwashers (21 ), and bearing caps
top cover (13), and gasket (12).
(20). Remove retaining ring (23) and bearing cup
(7) Remove and disassemble the interaxle
(24).
differential as follows:
(c) Remove differential and gear assembly
(a) Remove shift housing (48, fig. 17-4)
(25-- 28, and 54-- 60) as a unit.
and shift assembly (33) as a unit. Remove gaskets
(d) Center punch halves of case assembly
(47).
(28) for correct alignment during reassembly.
KEY to fig. 17-4.
1. Cotterpin(21
37.
Nut
2. Nut (2L)
38.
Ball
3. Washer
39.
Shift fork
4. Yoke
40.
Washer
5. Slinger (2)
41.
Spring
6. Capscrew (6)
42.
Bolt
7. Lockwasher(61
43.
Screw
8, Seal (2)
44.
Washer
9. Cover
45.
Spring
10. Gasket
46.
Gasket
11. Bearing
47.
Gasket 121
12. Shaft
48.
Housing
13. Spacer
49.
Nut
14. Cover
50.
Screw
15. Gasket
51.
Stud
16. Retaining ring (2)
52.
Clutch collar
17. Bearing
53.
Differential case assembly
18. Gear set-for illustration purposes only.
54.
Thrust washer
Same as item 11 of fig. 17-3.
55.
Gear
19. Bearing
56.
Thrust washer (41
20. Bearing cup
57.
Pinion (41
21. Housing
58.
Spider
22. Filler plug
59.
Gear
23. Drain plug
60.
Thrust washer
24. Lock wire
61.
Nut (12)
25. Spacer(AR)
62.
Bolt 121
26. Bearing cup
63.
Lock wire
27. Bearing
64.
Cover
28. Nut
65.
Lockwasher (8)
29. Lock nut
66.
Capscrew (81
30. Lockwasher
67.
Bearing cup (21
31. Nut
68.
Bearing(21
32. Shim (AR)
69.
Spacer (AR)
33. Shiftassembly
70.
Capscrew (8)
34. Nut (3)
71.
Washer
33. Stud (2)
72.
Gasket
36. Cotter pin
73.
Capscrew (4}
17-7
