then install the assembly along with bearing cup
(9) Install axle shaft (45, fig. 17-3) and dowels
(11) into hub (18).
(7, fig. 17-2), and secure with lockwashers (5) and
(4) Install hub (18) and drum (20) as a unit
nuts (4).
(5) Pack bearing (10) with grease specified in
(10) Install wheels (refer to TM 5-3810-294-
the current LO and install in bearing cup (11 )
20).
(6) Install nut (3). Draw nut up tight, then
17-6. Forward-Rear Axle and Interaxle Dif-
back off one-quarter turn. Spin the hub and drum
ferential Assembly
a. Removal. Refer to paragraph 11-12 and
in both directions and inspect for free rotation
without excessive end play. Readjust nut (3) as
remove forward-rear axle assembly.
b. Disassembly.
necessary.
(7) Install washer (2) and nut (1}, and tighten
1) Drain lubricant from forward-rear axle
nut securely.
and interaxle differential.
(8) Install seal wiper (8). Place oil seal (9) and
(2) Remove hub and drum assembly (refer to
gaskets (7) over studs (19).
para 17-5).
KEY to fig. 17-3.
* 1. Capscrew (6)
* 39. Yoke
* 2. Lockwasher (6)
* 40. Nut
* 3. Cover
* 41. Washer
* 4. Gasket
* 42. Cotter pin
* 5. Spacer
* 43. Capscrew (8)
* 6. Retaining ring (2)
*44. Lockwasher (8)
7. Bearing
45. Axle shaft, LH Axle shaft, RH
8. Spacer
46. Housing
9. Sleeve
47. Breather assembly
10. Bearing
48. Pipe plug
* 11. Gear set - includes gear and pinion, and
49. Filler plug
through-shaft *
50. Drain plug
12. (Gasket
51. Gasket
13. Cover
52. Gasket
14. Lockwasher (8)
53. Stud (14)
15. Capscrew (8)
54. Capscrew (8)
16. Capscrew (8)
55. Thrust washer (2)
17. Lockwasher (8)
56. Gear (2)
18. Cover
57. Thrust washer (4)
19. Gasket
58. Pinion 141
20. Bearing cap (2)
59. Spider
21. Lockwasher (41
60. Gear
22. Capscrew (41
61. Nut (14)
23. Retaining ring (2)
62. Lockwasher (14)
24. Bearing cup (21
63. Lock wire
25. Bearing 12)
64. Capscrew (6)
26. Nut (8)
65. Cover
27. Lock wire
66. Shim (AR)
28. Case assembly
67. Capscrew (31
* 29. Bearing
68. Washer
* 30. Bearing cup
69. Bearing cup (2)
* 31. Spacer (AR)
70. Bearing 12)
* 32. Shim (AR)
71. Bearing cage
* 33. Bearing cage cover
72. Pinion shaft
* 34. Bearing cup
73. Key
* 35. Bearing
74. Shim (AR)
* 36. Washer
75. Setscrew
* 37. Seal
76. Housing
* 38. Slinger
17-5
