TM 5-3810-295-34
Figure 5-6. Rear drumshaft assembly--exploded view.
a. Remove nut (1) lock washer 5(2) and keyed
CAUTION
washer (3). Remove male elbow (4 pipe coupling (5) and
Shaft (20) must be pressed out from left to right,
pipe nipple (6).
as shown in the Illustration.
b. Using a suitable puller, remove bearing (7) from
d. Bearing (22) and seal (21) will come out with the
shaft (20). Remove retainer (14) and gasket (15).
shaft. Remove bearing and seal from the shaft Remove
c. Using a suitable puller, remove bearing (16), and
bearing (23) from the opposite end of the drum. Remove
retainer (17) and seal (18). Pull gear (19) from drum
fittings (25) and (26), and wedge (27).
(24).
5-13
