TM 5-3810-295-34
Figure 13-10. Bearing support torquing sequence
(5) Install new gasket (4, fig. 13-7) and adapter
tighten only.
(3). Install lock washer (2) and capscrews (1), snug
Section VII. FUEL TANK, LINES AND FITTINGS
13-31. Removal and Disassembly
reducer (12), check valve (13), and adapter (14).
a. Refer to figure 13-11 and disconnect fuel lines as
described:
hose (17). Remove elbow (18).
(1) Loosen couplings (1) and (2). Remove hose (3).
(5) Loosen nuts (19) and remove tube (20).
Remove elbows (4) and (5).
Remove
(2) Loosen couplings (6) and remove hose (7).
adapter (21), bushing (22), pipe tee (23), and elbow (24)
Remove adapter (8).
(6) Loosen couplings (25) and (26) and remove
(3) Remove elbow (9), bushing (10), pipe tee (11),
hose (27). Remove elbow (28).
13-22
