TM 5-3810-295-34
b. Refer to figure 17-2 and disassemble steering col-
cover (21) off housing (42). Remove bearing (22), spring
umn and gear box as follows:
(23) and seat (24) from tube (25).
(1) Remove cap screws (1) and lock washers (2).
(6) Remove tube (25) from shaft (40).
Remove cover (3) from housing (42).
(7) Remove screw (26) and contact ring (27)
(2) Remove oil seal (4) and pipe plug (5) from cover
from shaft (40)
(3). Discard oil seal.
(8) Remove cap screw (28), washer (29), bevel
(3) Remove shims (6), (7) and (8). Remove shaft
gear (30), collar (31), bearing (32), spacer (33), shim (34),
assembly from housing (42).
spacer (35) and bearing (36) from shaft (40).
(4) Remove cap screw (9), washer (10), bevel gear
(9) Remove shims (37), (38)and (39) from cover
(11), collar (12), bearing (13), spacer (14), shim (15),
(21).
spacer (16), and bearing (17) from shaft (18).
(10) Remove pipe plug (41) from housing (42).
(5) Remove cap screws (19) and washers (20). Lift
17-2
