TM 5-3810-295-34
1 Cap screw
2 Lockwasher
3 Roll pin
4 Toggle pin
5 Bar pin
6 Chain
7 Float plate
8 Float plate
Figure 19-6. Float pad assembly--exploded view.
d. Refer to figure 19-7 and disassemble the front
(3) Remove cap screw (8), lockwasher (9) and clamp
outrigger as follows:
(10). Remove hydraulic lines (11).
Lift step plate (3) from outrigger arm (16).
(14). Remove ball sockets (15) from hydraulic cylinder.
(2) Remove adapter (4), coupling (5), elbow (6),
and preformed packing (7) from hydraulic hoses
(11).
19-11