TM 5-3810-295-34
e. Refer to figure 19-8 and disassemble the rear
outrigger assemblies as follows:
(1) Remove adapter (1), coupling (2), elbow (3), and
preformed packing (4) from hydraulic lines (8).
(2) Remove cap screw (5), lockaasher (6) and clamp
(7). Remove hydraulic lines (8).
(3) Remove screws (9) and lockwashers (10).
Remove light assembly.
(4) Remove screws (11) and lift lamp (12) and lamp
ring (13) away from outrigger arm (23). Disconnect lead
(14).
(5) Remove screws (15), lockwashers (16) and nuts
(17). Remove safety reflectors (18).
(6) Remove cap screws (19), lockwashers (20), and
nuts (21). Remove ball socket halves (22) from hydraulic
cylinder.
Figure 19-7. Front outrigger assembly--exploded view
19-12
