TM 5-3810-300-24 & P2
Remove the three tension balls located tender the
springs.
NOTE:
For ease of reassembly, lay all parts on a clean bench in
order of removal. Bars not being removed must be kept
in the neutral position or interlock parts will lock the
bars.
Place the shift bar housing in a vise, cut the lockwire,
turn out the lockscrew and pull the 1st-reverse shift bar
from the housing, removing the yoke.
Cut the lockwire, turn out the lockscrew and pull the
2nd-3rd speed shift bar from the housing, removing the
interlock pin from the neutral notch; remove yoke.
4-121
