TM 5-3810-300-24 & P2
Illustration 4-38. Auxiliary Drive Gear / Clutch Gear Assembly
10. Disassemble Auxiliary Drive Gear/Clutch Gear Assembly.
NOTE
SEE ILLUSTRATION 4-38 FOR EXPLODED VIEW OF AUXILIARY DRIVE GEAR/CLUTCH GEAR ASSEMBLY.
NOTE
ASSEMBLY SHOULD BE DISASSEMBLED ONLY IF ABSOLUTELY NECESSARY. THE RETAINING PIN IS NOT
REUSABLE AND MUST BE REPLACED.
Align one of the holes in the small diameter of the drive
gear with the retaining pin of the clutch gear and mount
the assembly in a vise.
Remove the bended end of the pin and drive the pin
down and through the hole in the drive gear
4-144