TM 5-3810-302-10
1.
Position the outrigger selector valve Iever (16) to front center. Move the
OUTRIGGER control lever (4) to OUT until the front wheels clear the ground.
Release OUTRIGGER control lever (4).
2.
Position the outrigger selector valve lever (16) to rear center. Move
3.
OUTRIGGER control lever (4) to OUT until the rear wheels are clear of the
ground.
Release OUTRIGGER control lever (4).
4.
Lower outrigger arms as necessary to center bubble in bubble level
5.
indicator (15).
NOTE
For `on-outrigger' lifts the tires must be clear
of the ground.
STOWING THE OUTRIGGERS.
NOTE
More than one outrigger may be retracted at
one time.
Position the outrigger selector valve lever (16, figure 4-1) to rear
1.
center. Move OUTRIGGER control lever (4) to IN until the rear outrigger arms
are fully retracted.
Release OUTRIGGER control lever (4).
2.
Position the outrigger selector valve lever (1 6) to front center. Move
3.
OUTRIGGER control lever (4) to IN until the front outriggers are fully
retracted.
Release OUTRIGGER control lever (4).
4.
SWINGING THE BOOM.
WARNING
BEFORE INITIATING ANY SWING OPERA-
TIONS, MAKE CERTAIN THE AREA IN THE
SWING PATH OF THE HOOK AND/OR
LOAD, AS WELL AS THE TAIL SWING
AREA, IS CLEAR OF ALL OBSTRUCTIONS
AND PERSONNEL.
