CONTROLS AND OPERATION
SECTION II
An electrical overload will cause a breaker to trip. Reset the
44. LEVEL. Check the level of the machine with this gauge.
circuit breaker and continue operation. The circuit breaker
46. SWING LOCK SWITCH. Move switch toward operator
contains a trip-free feature which allows its contacts to
to engage the 360 swing lock. Move switch away from
open even if the breaker is manually held in the reset posi-
operator to disengage swing lock.
tion against an overload. If the circuit breaker should trip
shortly after it is reset, check the circuit protected by the cir-
cuit breaker for the cause of the overload.
TA5015640
Figure 2-2. Load Weighing System
Change 1