F i g u r e 11B-55. Valve Guide
Install Exhaust Valve Bridge Guide
Install the press-fit bridge guide as fol-
lows:
Figure 11B-54. Removing Exhaust
V a l v e Guide
remover and turn it clockwise to with-
draw the guide from the cylinder head.
To remove a broken valve bridge drill a
hole approximately 1/2" deep in the end
of the guide with a No. 3 (0.2130") drill
Then tap the guide with a 1/4"-28 bot-
toming tap. Thread remover J 7453 into
the guide and attach slide hammer J
2619-01 to the remover tool. One or two
sharp blows with the puller weight will
remove
the
broken
guide
(see
Figure 11B-56. Installing Valve
Guide
F i g u r e 11B-57. Removing Press-Fit Exhaust Valve Bridge Guide
Engine (Less Major Assemblies) 11B-37