TM5-3810-305-10
LRT 110 Crane Work Platform
Requirements
1. Work platforms suspended from a load line
or rigidly mounted to the boom shall comply
with all applicable government and/or indus-
try standards relating to design and manufac-
ture, including, but nor limited to, ANSI
A92.2-1979.
a.
b.
Design considerations for a work platform
suspended from a load line include:
l Material and design safety factors.
l Construction, including fasteners and
welding.
l Flooring.
l Hand rails.
l Toe boards.
l Safety lanyard attachments.
l Gates.
l Hoisting and tag line attachments.
l Load limit, occupant limit and work
platform weight instructions on labels
and warnings.
Design considerations for a work platform
rigidly mounted to the boom include:
l Material and design safety factors.
l Construction, including fasteners and
welding.
l Flooring,
l
l
Hand rails.
Toe boards.
Safety lanyard attachments.
Gates.
A means of adjusting and locking the
work platform level.
Load limit, occupant limit and work
platform weight instructions on labels
and warnings.
2. Specifications for a work platform must be in
writing and must describe the platform
weight, load and occupancy limit, method of
platforms inspection and maintenance and
procedures for attachment to the LRT 110
Crane. The above, plus any appropriate pre-
cautionary information applicable to the
platform must be permanently placed either in
the vehicle or on the work platform.
Inspection, Rigging, Testing and
Operating a Work Platform for the LRT
110 Crane
1. The inspection, operation and safety require-
ments for a work platform suspended from a
load line or rigidly mounted to the boom must
at all times comply with PCSA Std. No. 4 and
all appropriate government regulations.
2. In addition, all of the following limitations
and minimum safety requirements apply:
1-43
