TM 5-3810-305-23
0049
REMOVAL - Continued
Low-Pressure Tubes
NOTE
Before removal of fuel injection tubes, have suitable container available.
Tag all hose and tube assemblies before disconnecting to aid in installation. Cap and
plug all ports. Remove caps, plugs, and tags following maintenance.
1.
Disconnect two fuel pressure sender hoses (Figure 4, Items 6 and 7) from banjo fittings
(Figure 4, Items 3 and 5).
2.
Remove two banjo screws (Figure 4, Items 8 and 9) and four copper seals (Figure 4, Items 2 and 4) from
engine (Figure 4, Item 1). Discard four copper seals.
2
1
5
3
4
6
9
8
7
M0255105
Figure 4.
Low-Pressure Tubes Removal.
03/15/2011Rel(1.8)root(maintwp)wpno(M00055)