TM 5-3810-305-23
0114
REMOVAL
WARNING
Never disconnect hydraulic lines or fittings before venting pressure. Turn dipstick cap 1/4 turn
to safety notch to relieve pressure. Failure to follow this warning may cause death or injury
to personnel.
1.
Turn dipstick cap 1/4 turn to safety notch to relieve pressure.
NOTE
Tag all hose and tube assemblies before disconnecting to aid in installation. Cap and plug
all ports. Remove caps, plugs, and tags following maintenance.
2.
Disconnect hoses (Figure 1, Item 7) from flow divider (Figure 1, Item 1) and steering valve (Figure 1, Item 12).
3.
Remove two nuts (Figure 1, Item 13), lockwashers (Figure 1, Item 14), and capscrews (Figure 1, Item 6) from
steering valve (Figure 1, Item 12). Discard lockwashers.
4.
Remove flow divider (Figure 1, Item 1) and steering valve (Figure 1, Item 12) as a unit from its frame location.
5.
Remove flow divider (Figure 1, Item 1) from adapter (Figure 1, Item 4).
6.
Remove adapter (Figure 1, Item 4) and two o-rings (Figure 1, Item 5) from steering valve (Figure 1, Item 12).
Discard o-rings.
7.
Remove two elbows (Figure 1, Item 10) and o-rings (Figure 1, Item 11) from steering valve
(Figure 1, Item 12). Discard o-rings.
8.
Remove adapter (Figure 1, Item 8) and o-ring (Figure 1, Item 9) from steering valve (Figure 1, Item 12).
Discard o-ring.
9.
Remove elbow (Figure 1, Item 2), o-ring (Figure 1, Item 3), adapter (Figure 1, Item 8), and o-ring
(Figure 1, Item 15) from flow divider (Figure 1, Item 1). Discard o-rings.
0114-2
03/15/2011Rel(1.8)root(maintwp)wpno(M00127)