TM 5-3810-305-23
0114
INSTALLATION
1.
Install new o-ring (Figure 2, Item 15) and adapter (Figure 2, Item 8) on flow divider (Figure 2, Item 1).
2.
Install new o-ring (Figure 2, Item 3) and elbow (Figure 2, Item 2) on flow divider (Figure 2, Item 1).
3.
Install adapter (Figure 2, Item 8) and new o-ring (Figure 2, Item 9) on flow divider (Figure 2, Item 1).
4.
Install two elbows (Figure 2, Item 10) and new o-rings (Figure 2, Item 11) on flow divider (Figure 2, Item 1).
5.
Install two new o-rings (Figure 2, Item 5) and adapter (Figure 2, Item 4). Install flow divider (Figure 2, Item 1)
onto steering valve (Figure 2, Item 12).
6.
Install flow divider (Figure 2, Item 1) and steering valve (Figure 2, Item 12) as a unit in the frame.
7.
Install two capscrews (Figure 2, Item 6), new lockwashers (Figure 2, Item 14), and nuts (Figure 2, Item 13)
on steering valve (Figure 2, Item 12).
8.
Check hydraulic oil level. Fill to proper level, if necessary (TM 5-3810-305-10). Close dipstick cap.
2,3
1
8,15
4
5
14
6
13
7
7
10,11
12
10,11
M0324105
8,9
Figure 2. Flow Divider and Steering Valve Installation.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00127)