TM 5-3810-305-23
0116
REMOVAL
1.
Remove cotter pin (Figure 1, Item 1) from nut (Figure 1, Item 2). Discard cotter pin.
2.
Remove nut (Figure 1, Item 2) and bushing (Figure 1, Item 3) from pintle hook (Figure 1, Item 5).
3.
Remove pintle hook (Figure 1, Item 5) from vehicle.
END OF TASK
DISASSEMBLY
Remove three grease fittings (Figure 1, Item 4) from pintle hook (Figure 1, Item 5).
END OF TASK
CLEANING
Clean parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSPECTION
Inspect parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
ASSEMBLY
Install three grease fittings (Figure 1, Item 4) onto pintle hook (Figure 1, Item 5).
END OF TASK
INSTALLATION
1.
Install pintle hook (Figure 1, Item 5) onto vehicle.
2.
Install bushing (Figure 1, Item 3) and nut (Figure 1, Item 2) onto pintle hook (Figure 1, Item 5).
3.
Install new cotter pin (Figure 1, Item 1) onto nut (Figure 1, Item 2).
0116-2
03/15/2011Rel(1.8)root(maintwp)wpno(M00129)