TM 5-3810-305-23
0135
REMOVAL - Continued
13.
Loosen axle lockout valve mounting nuts (Figure 4, Item 3).
14.
Using a hoist and sling, remove manifold (Figure 4, Item 1) by lifting and turning to clear stop pin ear
(Figure 4, Item 2) on upperstructure as manifold is removed from vehicle.
1
3
2
M0457105
Figure 4. Rotary Manifold Removal.
END OF TASK
DISASSEMBLY
NOTE
Match mark spool to case to aid in assembly.
1.
Remove four capscrews (Figure 5, Item 1), plate (Figure 5, Item 2), o-ring (Figure 5, Item 3), and thrust washer
(Figure 5, Item 4) from case (Figure 5, Item 13). Discard o-ring and thrust washer.
2.
Remove spool (Figure 5, Item 12) from case (Figure 5, Item 13).
3.
Remove back-up ring (Figure 5, Item 6) and o-ring (Figure 5, Item 10) from spool (Figure 5, Item 12).
Discard o-ring.
4.
Remove two retainer packings (Figure 5, Item 11), seven gaskets (Figure 5, Item 8), and gaskets
(Figure 5, Item 9) from spool (Figure 5, Item 12). Discard retainer packings and gaskets.
03/15/2011Rel(1.8)root(maintwp)wpno(M00151)