TM 5-3810-306-20
c. Wipe adapters clean of sealant with rag.
d. Pull two hoses (11 and 12) from water outlet and
water inlet connectors.
3.
INSPECT PARTS FOR DAMAGE. REPLACE AS
REQUIRED.
INSTALLATION:
1.
ASSEMBLE TOP AND BOTTOM RADIATOR
HOSES AND TUBES.
a. Connect four hoses and two tubes.
b. Loosely install eight clamps (4) around ends of
top and bottom radiator hoses.
c. Loosely install capscrew (5), new lockwasher (6),
flatwasher (7), and tube clamp (8) to bottom tube
(13).
2.
JOIN HOSES (11 AND 12) TO WATER INLET AND
OUTLET CONNECTORS. TIGHTEN CLAMPS (4).
CAUTION
Do not apply sealant to inside of
hose. This results in clogged coolant
passages
and
premature
engine
failure.
3.
JOIN HOSES (9 AND 10) TO RADIATOR
ADAPTERS.
a. Apply a moderate amount of permatex No. 2 to
mate ends of radiator adapters.
b. Push hoses (9 and 10) on adapters. Wipe
excess sealant with rag.
c. Tighten two hose clamps (4) on radiator
adapters.
7-7