TM 5-3810-306-20
RADIATOR, MOORING BRACKET AND SHROUD REPLACEMENT
TOOLS:
General mechanic’s tool kit: automotive (5180-00-177-7033)
Lifting device (2-ton capacity)
SUPPLIES: Lockwashers (Item 2, Appendix C) (20 Required)
Clean rags (Item 1, Appendix C)
Permatex No. 2 (Item 79, Appendix C)
Anti-freeze (MIL-A-46153) (Item 10, Appendix C)
EQUIPMENT CONDITION:
Disconnect ground cable at shunt. (Refer to page 8-109.)
Engine hood assembly removed. (Refer to page 15-14.)
REMOVAL:
WARNING
Be sure engine coolant has cooled
before draining coolant from radiator.
Engine coolant can cause burns
when hot.
1.
DRAIN RADIATOR COOLANT.
a. Place drain pan under petcock (1). Remove
radiator cap (2).
b. Open petcock (1).
c. Wipe up spillage with rags.
2.
DISCONNECT TWO RADIATOR HOSES (3).
a. Loosen hose clamps (5) on top and bottom
radiator hoses (3).
b. Disconnect two hoses from radiator (6). Save
hose clamps (5).
3.
DISCONNECT FAN GUARD (7) FROM FAN
SHROUD (8).
a.
Remove four screws (9), lockwashers (10), and
flatwashers (11). Discard lockwashers (10).
b.
Push fan guard (7) against fan pulley.
7-9
