TM 5-3810-306-20
4.
DISCONNECT
COOLANT
RECOVERY
TANK
HOSE (12), AND OVERFLOW HOSE (14).
a. Loosen hose clamp (15) and disconnect coolant
recovery tank hose (12). Save hose clamp (15).
b. Remove capscrews (17), lockwashers (18),
flatwashers (19), and tubing clamps (20) holding
overflow hose (14) to radiator (6). Discard
lockwashers (18).
5.
REMOVE RADIATOR (6).
a. Remove nut (21) securing adjusting rod (22) to
frame.
b. Remove eight locknuts (23) and washers (24)
securing mounting bracket (25) to frame (26).
c. Move radiator rearward.
d. Remove six capscrews (17), lockwashers (18)
and flatwashers (19) securing shroud (8).
Discard lockwashers (18).
e. Unscrew fitting (16). Disconnect drain hose (13)
at bottom of radiator (6).
f.
Disconnect two torque converter oil cooler lines
(4). Cap open lines.
g. Using a suitable lifting device, remove radiator.
h. Set radiator assembly in clean work area and
remove lifting equipment.
7-10
