TM 5-3810-306-20
WARNING BUZZER REPLACEMENT
TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES:
None
EQUIPMENT CONDITIONS: Disconnect ground cable at shunt. (Refer to page 8-109.)
Right front control panel removed. (Refer to page 8-11.)
REMOVAL:
1.
REMOVE WARNING BUZZER (2).
a. Tag and disconnect electrical wires.
b. Hold back of warning buzzer (2). Unscrew front cap
(1). Pull warning buzzer (2) from panel.
2.
INSPECT PARTS FOR DAMAGE. REPLACE AS
REQUIRED.
INSTALLATION:
1.
INSTALL WARNING BUZZER (2).
a. Put warning buzzer (2) through panel.
b. Install front cap (1).
c. Remove tags. Connect electrical wires. Tighten
screws securing wires.
2.
INSTALL RIGHT FRONT CONTROL PANEL.
(REFER TO PAGE 8-11.)
3.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
END OF TASK
8-36
