TM 5-3810-306-20
TOGGLE SWITCH REPLACEMENT
TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES:
None
EQUIPMENT CONDITION:
Disconnect ground cable at shunt. (Refer to page 8-109.)
Right front control panel or side access panels removed as required. (Refer to page 8-11 or
8-21.)
REMOVAL:
NOTE
Use this task to remove or install
toggle switches (4) on front control
panel or side console. Drive axle
toggle switch (4) is shown.
1.
REMOVE TOGGLE SWITCH (4).
a.
Tag and disconnect electrical wires (5).
b.
Remove nut (1). Pull off switch guard (3) if
applicable.
c.
If applicable inspect vinyl sleeve (2). If
damaged, do step d.
d.
Slide vinyl sleeve (2) off switch guard (3).
e.
Pull out toggle switch (4).
2.
INSPECT PARTS FOR DAMAGE. REPLACE AS
REQUIRED.
INSTALLATION:
1.
INSTALL TOGGLE SWITCH (4).
a.
Put toggle switch (4) through panel. Hold in
place.
b.
Install switch guard (3) if necessary and secure
with nut (1).
8-34
