STOP LIGHT SWITCH REPLACEMENT

TM-5-3810-306-20 Container Crane 40-Ton Rough Terrain Model RTB75CC Manual
Page Navigation
185

TM 5-3810-306-20 STOP LIGHT SWITCH REPLACEMENT TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033) SUPPLIES: Loctite #545 (Item 13, Appendix C) EQUIPMENT CONDITIONS: Cab bottom panel removed. (Refer to page 15-11.) Disconnect ground cable at shunt. (Refer to page 8-109.) REMOVAL: 1. REMOVE STOP LIGHT SWITCH (1). a. Tag and remove electrical leads to stop light switch (1). b. Unscrew stop light switch (1) from reducer (2). c. Remove reducer (2) and inspect for damage. Replace if necessary. INSTALLATION: NOTE Prior to installing switch and reducer, coat threads with Loctite #545. 1. INSTALL STOP LIGHT SWITCH (1). a. Install reducer (2) on brake control valve (3). b. Install stop light switch (1) on reducer (2). Tighten securely. c. Remove tags and connect electrical leads to stop light switch (1). 2. CONNECT GROUND CABLE AT SHUNT. (REFER TO PAGE 8-109.) 3. TEST FOR PROPER OPERATION OF STOP LIGHTS. (REFER TO TM 5-3810-30610.) 4. INSTALL CAB BOTTOM PANEL. (REFER TO PAGE 15-11.) END OF TASK 8-31

Privacy Statement
Press Release
Contact