TM 5-3810-306-20
c.
Remove tags, plugs and connect air lines (7 and
8) to park brake control valve (1).
d.
Install electrical wires (5) to pressure indicator
switch (6).
e.
Position park brake control valve (1) through
hole in side console and secure to console with
mounting nut (2).
f.
Install knob (4) on valve stem and secure with
drive pin (3).
2.
INSTALL SIDE CONSOLE FRONT ACCESS
PANELS (REFER TO PAGE 8-21.)
3.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
4.
START-UP ENGINE AND ALLOW AIR PRESSURE
TO BUILD UP. (REFER TO TM 5-3810-306-10.)
5.
CHECK
ALL
AIR
OPERATED
FUNCTIONS.
(REFER TO TM 5-3810-306-10.)
END OF TASK
11-29
