TM 5-3810-306-20
SPRING BRAKE CONTROL VALVE REPLACEMENT
TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES:
None
EQUIPMENT CONDITIONS: Wheels are chocked.
Disconnect ground cable at shunt. (Refer to page 8-109.)
Air system is purged. (Refer to page 11-2.)
Operator’s seat and pedestal removed. (Refer to page 15-27.)
Side console rear access panel removed. (Refer to page 8-21.)
REMOVAL:
1.
REMOVE SPRING BRAKE CONTROL VALVE (1).
a.
Tag and disconnect four air lines on spring brake
control valve (1). Plug air lines.
b.
Remove two nuts (3) and washers (2) to free
spring brake control valve (1) from cab mounting
studs.
c.
Remove fittings. Retain for installation or
replace if damaged.
INSTALLATION:
1.
INSTALL SPRING BRAKE CONTROL VALVE (1).
a.
Install fittings.
b.
Align spring brake control valve (1) on cab
mounting studs. Secure with nuts (3) and
washers (2).
c.
Remove tags, plugs and connect air lines to
spring brake control valve (1).
2.
INSTALL SIDE CONSOLE REAR ACCESS PANEL.
(REFER TO PAGE 8-21.)
11-33
