TM 5-3810-306-20Daily LubricationMake certain that all components requiring daily lubrication have been serviced. (Refer to LO 5-3810-306-12.)Hydraulic Reservoir and FilterCheck hydraulic fluid quantity level gauge and check filter condition indicator. Check breather for cleanliness and security.TiresCheck for severe cuts, foreign objects inbedded in treads, and for correct inflation pressures.Wire RopeInspect wire rope in accordance with PMCS. Sheaves, guards, guides, drums, flanges, and any other surfaces that comein contact with the rope should be inspected for any condition that could cause possible damage to the rope.Hook BlockVisually inspect for nicks, gouges, cracks, and evidence of any other damage. Replace a hook containing cracks orshowing evidence of excessive deformation of the hook opening (including twist). Be sure the safety latch is free andaligned.Air CleanersCheck the air restriction indicator. Check filters and tubing for security.Muffler and PipesInspect all exhaust system components from the turbocharger exhaust to the tailpipe for corrosion, damage, and looseparts.Fire ExtinguisherCheck the charge indicator dial to ensure that pointer is in the green zone.Cab HeaterCheck cab heater fuel tank is full. The tank is located on the left side of turntable.Windshield Washer FluidCheck the windshield washer fluid bottle located in the valve compartment behind the operator’s cab.2-4
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
