TM 5-3810-307-10
START
Upon switching on, the system starts with an automatic test of
the LMI system, of lamps and audible alarm. During the test, the
SELF TEST
LC display shows the initial logo.
If the system was turned off for more than two hours, the setup
system
no
turned off
configuration has to be entered after the system test. ( chapter
> 2h?
4)
yes
First, the operating mode is determined by an interactive step-by-
step interrogation of the rigging states.
interactive
INPUT
operating mode
Next is the interactive input of the reeving.
interactive
INPUT
reevings
Now the LC display shows in symbols all inputs and awaits
acknowledgment or canceling.
no
Inputs
OK?
Upon acknowledgment of the inputs the system is ready for
operation.
operational
The console has 3 functions:
inputs by the crane operator (operating mode, reeving)
input of geometry limit values and signalization of exceeded limit values
display of important data and information
The operator's console is mounted in the crane's cab in the operator's field of vision. For a
better identification of displays and operating elements, they are continuously backlit during
operation.
G-8 Change 1
