TM 5-3810-307-24-1-1
k.
Loosen clamp (16) and disconnect aeration hose (17) from adapter (52).
l.
Remove capscrews (18), lockwashers (19), large washers (20), fan guard (21), and spacers (22) from
shroud (44).
m. Remove capscrews (62), lockwashers (63), washers (64), and plate (60) from shroud (44) to access cooling
fan (25) attaching hardware.
n.
Remove capscrews (23), washers (24), cooling fan (25), and three-piece adapter (26) from engine.
o.
Remove nut (27), lockwasher (28), and disconnect support rod (29) from bottom of radiator (34).
p.
Remove locknuts (30), washers (31), capscrews (32), and washers (33) securing radiator (34) to frame
mounting brackets.
CAUTION
Ensure radiator and air cooler components do not catch on carrier baffling or
other components resulting in equipment damage when lifting assembly from
carrier.
q.
Attach lifting device to radiator (34), lift radiator (34) and air cooler (39) from carrier as an assembly, then
remove rubber mounts (35) from frame mounting brackets.
r.
Remove the following as necessary:
(1)
Remove capscrews (36), lockwashers (37), washers (38), air cooler (39), and baffle (40) from radiator
(34).
(2)
Remove capscrews (41), lockwashers (42), washers (43), and shroud (44) from radiator (34).
(3)
Remove capscrews (45), lockwashers (46), and radiator mount brackets (47) from radiator (34).
(4)
Loosen clamp (48) and remove drain valve (49) from radiator drain hose (5).
(5)
Loosen clamp (50) and remove hose (5) from adapter (51) and adapters (51 and 52) from radiator
(34).
(6)
Remove nuts (53), lockwashers (54), washers (55), capscrews (56), and coolant recovery tank (57)
from engine hood center cowl.
(7)
Remove clamps (58) and hoses (7 and 10) from recovery tank (57).
(8)
Remove clamp (59) and lower radiator hose (15) from radiator (34).
2-2-33
