TM 5-3810-307-24-1-1
DOUBLE SOLENOID VALVES
DESCRIPTION
The double solenoid valves are located to the front and
an area definition switch.
For more detailed
rear of the swing bearing on the center of the carrier
information on the double solenoid valve, refer to
frame. The valves are actuated by a micro switch and
VALVES in Section 8.
MAINTENANCE
REMOVAL.
INSTALLATION.
1.
Tag and disconnect the hydraulic hoses from the
1.
Position the valve on the mounting bracket and
ports on the solenoid valve (Figure 2-6-2). Cap or plug
secure with bolts, lockwashers, and nuts (Figure 2-6-
all openings.
2).
2.
Remove the two nuts, lockwashers, and bolts
2.
Connect the hydraulic hoses to the appropriate
securing the valve to the mounting bracket and remove
ports on the valve.
the valve.
Figure 2-6-2. Double Solenoid Valve
