TM 5-3810-307-24-1-1
7.
Cut tie wraps; remove plastic wrap/bags; and
9.
Service the hydraulic tank with oil, MIL-L-2104.
connect three multi-pin electrical connectors at the
electrical slip ring as tagged. Secure cable clamps to
10. Remove the blocking material from the lift
frame with two bolts. Be sure to capture the slip ring
cylinders.
ground wire in one of the two clamp bolts. Remove all
tags.
11. Activate all systems; cycle all functions and
observe for proper operation and any leakage.
8.
Cut tie wraps and remove plugs, covers,
couplers, and fittings in each of the disconnected air
lines. Connect all six air lines to the air/hydraulic
swivel, ports 1 thru 6, as tagged. Remove all tags.
2-13-8
