TM 5-3810-307-24-1-1
7.
Install the round connector receptacles into the
10. Connect each of the wires from connector one
mounting plate and secure with the screws.
into connector one.
8.
Connect the round connectors
and
the
11. Connect each of the wires from connector two
rectangular connectors as tagged.
into connector two.
9.
Install the swivel cover, gasket, and screws.
12. Plug the round and rectangular connectors into
the chassis wiring receptacles.
NOTE
13.
Connect the batteries.
Steps 10 and 11 are performed on the
collector ring harness after it has been
14. Activate all systems; cycle all functions and
routed down through the hydraulic and air
observe for proper operation.
swivel.
2-13-12
