SM02-025-0
Page 18
4
Noisy converter.
a.
Worn oil pump.
a.
Replace pump.
b.
Worn or damaged bearings.
b . Completely disassemble to de-
termine which bearing is faulty.
5
Lack of power
a. Low engine rpm at converter
a.
Tune engine, check governor.
stall.
b. Remove, disassemble, and re-
b.
Worn oil sealing rings
build converter assembly.
c.
Worn oil pump.
c.
Replace pump.
d.
Low oil level.
d.
Fill to proper level.
e.
Pump suction line taking air.
e. Check oil line connections and
tighten.
TORQUE CONVERTER/TRANSMISSION.
Disassembly.
CAUTION
Cleanliness is of extreme importance
and an abosolute must in the repair
and overhaul of this unit. Before
attempting any repairs, the exterior
of the unit must be thoroughly cleaned
to prevent the possibility of dirt and
foreign matter entering the mechanism.
2.
Remove the pressure regulating valve stud
nuts, bolts and washers.
Loosen filter assembly and catch any oil in a
1.
drain pan. Remove the filter assembly when the oil
3.
Remove the pressure regulating valve and
has drained.
charging pump assembly.
