SM02-025-0
Page 85
2.
Install the clutch piston inner seal rings.
8.
Install the end plate retainer ring.
FORWARD HIGH.
3.
Install the clutch piston in the clutch drum. Use
caution as not to damage seal rings.
NOTE
Ring must be sized before installing in
clutch drum. Sizing is best accomplished
by rotating piston while holding a round
object against the new seal ring as
shown. Rotate piston until seal ring is
flush with outer diameter of piston.
1.
Install the clutch piston outer seal rings.
4.
Position the piston return spring spacer over
the clutch shaft.