SM02-025-0
Page 90
Assembly.
5.
Remove piston return springs. (Belleville
NOTE
washers)
Ring must be sized before installing in
clutch drum. Sizing is best accomplished
by rotating piston while holding a round
object against the new seal ring as
shown. Rotate piston until seal ring is
flush with outer diameter of piston.
1.
Install clutch piston outer and inner seal rings.
6.
Remove the piston spacer.
2.
Install the clutch piston in the clutch drum. Use
caution as not to damage the seal rings.
7.
Remove the clutch piston.
