SM03-026-0
Page 10
3.
Back off the drive pinion from the ring gear and then
ADJUSTMENT VALUES.
adjust the gear teeth edge clearances.
Adjustment of Ring Gear and Drive Pinion
The following figures show various improper gear meshing
marks. The accompanying paragraphs give the proper
procedure to obtain correct gear meshing. The black
arrows on the figures indicate the direction towards which
the corresponding wheel must first be moved and the white
arrows indicate the direction of any secondary adjustments.
1.
The following figure is an example of proper gear
marking.
4.
Reduce the gear teeth edge clearances. If the
correction is insufficient, move in the drive pinion.
2.
Move the drive pinion toward the ring gear and then
adjust the gear teeth edge clearances.
5.
Increase the gear teeth edge clearances. If this
change is insufficient, back off the drive pinion from the
ring gear.
