SM03-026-0
Page 33/(34 Blank)
Assembly.
1.
Install the pressure spring (4).
2.
Install O-ring (6) on piston (5).
3. Apply LOCTITE 572 to threads of the shift fork (3)
and maintain the shift fork (3) between the pressure spring
(4) and the housing.
4. Insert the piston (5) into the housing hole (lead the
pivot through the shift fork (3) and pressure spring (4) into
the dead eye) and screw up with the shift fork (3). The
piston is equipped with a slot for a screwdriver. Take care
not to damage the O-ring.
Disassembly.
5.
Screw in the switch (9)
1.
Remove the packing washer (8) and cap (7).
6.
Install the sliding sleeve (2) on the shift fork.
2.
Remove the sliding sleeve (2) from the shift fork.
7. Check the switching function. The indicator lamp
lights when the sliding sleeve (2) meshes with the
3.
Unscrew the switch (9).
differential case (1).
4.
Remove the piston (5) from the housing.
8.
Install the cap (7) and packing washer (8).
5.
Remove the shift fork (3).
6.
Remove the O-ring (6) from the piston (5).
7.
Remove the pressure spring (4).