& Maintenance
Chapter 7- Inspection
Visual Inspection System Off
-
Your observations and the corrective measures you take may be different
depending on circumstances. The following inspection procedures are ex-
plained in more detail below:
1. Observe the System
2. Inspect Parts
3. Check Hoses and Fillings
4. Check for Refrigerant Leaks
Use the following procedures as a general rule in performing a visual inspec-
tion with the AC system off:
1. Observe the System
Your first inspection step is to answer the following question if you can:
Has the vehicle just come in off the road and has the HVAC
system been in use?
Did the operator or work order explain or describe any prob-
lems about the system?
Did someone else work on the system yesterday, 700 miles
down the road? Your first inspection step is to answer these
questions if you can.
Even when someone has told you what is wrong with an
HVAC system, you should perform a visual inspection.
Always make a visual inspection before you hook up the
manifold gauge set. Never add refrigerant to a system
until you have made a complete visual and performance
inspection.
Inspect Parts
2.
Look at the system for what might come loose, leak, wear out or become
dirty and not function the way it should. The main points for visual
