TM 5-3810-307-24-1-2
Determine the final orientation of the valve plate (air
intake location) and the head (coolant ports with respect
to air inlet or manifold location). Align the kidney-shaped
slots in the head with the kidney shaped slots in the
gasket.
If orientation marks were made before disassembly, use
them.
Assemble the cover, cover gasket, head, head gasket,
and valve plate.
NOTE
Make sure corner capscrew holes are
aligned.
Lubricate the threads under the head.
Install the shorter capscrew with washer through the
center hole.
Torque Value: 14 Nm [120 in-Ib]
Install the valve plate gasket.
Change-1 12-27