TM 5-3810-307-24-1-2
Lubricate the unloader screw threads and underhead
with clean engine oil (SAE 15W40), before installation.
NOTE
The two unloader body screws must not be
used to attach any brackets.
Assemble the unloader components and attach the
unloader assembly to the valve plate with the four
capscrews and washers.
NOTE
The longer capscrews are used to mount the
manifold to the air compressor.
Torque Value: 27 Nm [20 ft-lb]
Air Compressor (Holset QE230,
SS296, SS296E, QE296, SS338E and
QE338 Models) (012-105)
Disassemble (012-105-003)
WARNING
Steam and compressed air present hazards
that can result in burns, eye damage or other
personal injury. Always wear protective
clothing and eye wear.
Use steam to clean the compressor. Use compressed
air to dry.
Remove the hydraulic
pump
adapter
from
the
compressor crankcase.
12-30 Change-1