TM 5-3810-307-24-2-1
Operate the priming button on the lift pump until the
fuel flowing from the fitting is free of air.
Tighten the bleed screw.
Torque Value: 9 Nm
[7 ft-lb]
High Pressure Lines
Venting
17 mm, 19 mm
WARNING
The pressure of the fuel in the line is
sufficient to penetrate the skin and cause
serious bodily harm.
Venting is accomplished by loosening one or more fit-
tings at the injectors and cranking the engine to allow
entrapped air to bleed from the lines.
