TM 5-3810-307-24-2-1
Re-Tighten Line Fittings
Torque Value: 30 Nm
[22 ft-lb]
WARNING
Do not bleed a hot engine as this could
cause fuel to spill onto a hot exhaust
manifold creating a danger of fire.
Start the engine and vent one line at a time until the
engine runs smoothly.
CAUTION
When using the starting motor to vent the
system, do not engage it for more than 30
seconds at a time: Wait two (2) minutes
between engagements.
WARNING
It is necessary to put the engine in the "RUN"
position. Because the engine may start, be
sure to follow all the safety precautions. Use
the normal engine starting procedure.