TM 5-3810-307-24-2-1
Six-Cylinder Engine Adjustment
14 mm, Flatblade Screwdriver
Locate Top Dead Center (TDC) for Cylinder
Number 1
Check/adjust the valves as indicated in the
illustration
(I = Intake, E = Exhaust).
Tighten the lock nut and measure the valve lash
again.
Torque Value: 24 Nm
[18 ft-lb]
Mark the pulley/vibration damper and rotate the
crank-shaft 360 degrees.
CAUTION
To prevent engine or pin damage, be sure
timing pin is disengaged.